forklift battery-1

Sitemap

Laser Guidance

Battery Charger

Mounting Instructions

Pricing

Production & Safety Benefits
Laser Specs
Dealer Application
About
US-Lasers
Contact US-Lasers
Roof-Guard
Printable Brochures

Accu-Fork™forklift battery-2
Patent Pending

A SELF-CONTAINED
LASER GUIDED
FORKLIFT SYSTEM

Accu-Fork is an inexpensive, high-tech, parallel mounted laser guidance device that ensures exact placement
of the fork tips.


It provides the forklift operator with a constant visual reference
to exact fork tip location when placing or retrieving a product
from it's storage space.forklift battery-3

The Accu-Fork Forklift Laser system utilizes
state of the art circuitry in order to
improve the overall performance and features of the product.

forklift battery-4

forklift battery-5

 

Utilizing a Vibration Sensitive Circuit, the Accu-Fork Laser will automatically engage with any movement of the forks.forklift battery-6

The Vibration Sensitive Circuit and Laser are housed in a machined
aluminum housing. The Vibration Sensitive Circuit automatically
cuts power to the unit 30 seconds after movement stops.
The need for an On/Off Switch is completely eliminated.

forklift battery-7

INEXPENSIVE and FEATURE PACKEDforklift battery-8

  • Reduction in Product Damage (Increased Bottom Line)
  • Reduces Accident Risk (Lower Insurance Rates)
  • Increased Productivity (Increased Bottom Line)
  • Excellent Training Tool for New Drivers (Increased Driver Accuracy)
  • Increased Operator Efficiency (Boost Productivity)
  • Automatically Turns On and Off (Extends Battery Life)
  • Aluminum and Steel Housing for Durability (High Impact Resistance)
  • Works well in warehouses with low visibility due to insufficient lighting
  • Takes the guesswork out of Fork Placement
  • Rigid Clamping System (Quick, Easy Install)
  • 4.8v NiMH Battery (Longer working periods between recharges)
  • Yellow Zinc Chromate Coating for rust and corrosion resistance
  • Onboard Vertical Aiming Adjustment for Laser
  • Onboard Sensitivity Adjustment for Auto Switch Circuitry
  • Laser mounted in Anodized Aluminum Block (Durability)
  • Equipped with Thermo cutoff circuitry (Prevents Heat Damage)
  • Battery Compartment and Mounting Tube 1.5" x 1.5" square steel tubing

The laser is a highly efficient 650nm 5mW module that incorporates a Thermal Disconnect Circuit that will automatically shut down the laser if the ambient temperature exceeds the maximum temperature rating of the laser so it will not become damaged. 

The Accu-Fork is powered by a 4.8V NiMH rechargeable battery pack that has sufficient storage capacity to run the unit for approximately 40+ hours of continuous use.

The unit comes with a 4.8V NIMH Battery Charger that will put an 80% "quick charge" on the battery pack in 4 hours and will fully charge the battery pack in approximately 8 hours.

The Benefits of the Accu-Fork Laser System
  • The Accu-Fork does not require additional training to use.
    Minimal Familiarization is all that's needed.

  • The Accu-Fork is a self-contained unit that mounts directly on the fork carriage in under 5 minutes.

  • The Accu-Fork gives the operator a constant visual reference to fork position thus decreasing personal injury and product damage.

  • The Accu-Fork laser is controlled by a Vibration Sensitive Circuit that automatically turns the laser on and off to save battery life. The unit will operate approximately 40 hours before recharging is necessary.

  • This rugged laser device will not only save money by decreasing personal injury and product damage/loss, it will also provide a measurable boost to your company's' bottom line by increasing employee productivity.

  • During our product testing phase we discovered that Accu-Fork is an excellent training tool for new forklift operators.

  • Accu-Fork takes the "guesswork" out of forklift placement and provides all forklift operators additional confidence and peace of mind.
Feedback/Letters:

"Ever since we started using the Accu-Fork, productivity increased by at least 15%, damaged goods have decreased dramatically, and our drivers fell in love with them from the very start." - Warehouse Manager -Illinois

"Simply the best aftermarket addon for forklifts....Period." - Forklift Mechanic -Iowa

"Easily pays for itself in a matter of weeks." - CEO - Georgia

"Installation is a breeze, it took us longer to unpack the items than it did to install them." - Warehouse Manager -Chicago, IL

The Accu-Fork easily attaches to the forklift carriage in under 5 minutes. The Laser is vertically adjustable so it can be perfectly aligned parallel with the forks.

Accu-Fork is mounted horizontally with the forks.   When the laser dot hits the opening in the pallet, it disappears indicating forks are correctly aligned with pallet opening.

forklift battery-9

 

Distributors Wanted
Contact us For Dealer Pricing
For Your Convenience We Accept:  forklift battery-10

Corporate Offices:  1 Laser Lane, Hazlehurst, GA  - Voice:  912-379-0608 Fax:  912-375-9555
Contact Us

© Copyright 2003 US-Lasers, All Rights Reserved